通過rhel7的kvm虛擬機實現3節點Postgres-XL（包括gtm standby）

huhud 發布于2019-07-25 12:33 / 3788人閱讀

摘要：這里只演示修改下運行停掉的服務下運行，編輯配置文件，修改連接地址以下為修改后的顯示結果，是的服務，從可以看到下運行

????關于postgres-xl的實驗是在我自己筆記本rhel7.2_x64的環境下，用kvm實現的，總共有6臺虛擬機：

????一臺openfiler2.99發布共享存儲，一臺gtm master，一臺gtm slave，三臺gtm_proxy/coordinator/datanode，除了openfiler之外其余5臺虛擬機皆以最小化安裝rhel7.2_x64初始化，且具備兩張網卡，一張用于192.168.122.* 提供服務，一張用于10.10.10.* 讀取openfiler發布的共享存儲，具體的postgres-xl服務規劃如下。

服務名稱	服務作用	ip	服務端口	服務目錄	pooler port
gtm_mast	gtm master	192.168.122.179	20001	/pgdata/gtm/data
gtm_slav	gtm slave	192.168.122.189	20001	/pgdata/gtm/data
gtm_pxy01	gtm proxy	192.168.122.171	20001	/pgdata/gtm_pxy01/data
gtm_pxy02	gtm proxy	192.168.122.172	20001	/pgdata/gtm_pxy02/data
gtm_pxy03	gtm proxy	192.168.122.173	20001	/pgdata/gtm_pxy03/data
coord01	coordinator	192.168.122.171	15432	/pgdata/coord01/data	40101
coord02	coordinator	192.168.122.172	15432	/pgdata/coord02/data	40102
coord03	coordinator	192.168.122.173	15432	/pgdata/coord03/data	40103
datan01	datanode	192.168.122.181	25431	/pgdata/datan01/data	40401
datan02	datanode	192.168.122.182	25432	/pgdata/datan02/data	40402
datan03	datanode	192.168.122.183	25433	/pgdata/datan03/data	40403

一. 虛擬機操作系統配置 1. 主機名配置

對每個虛擬機修改主機名

hostnamectl set-hostname rhel7pg171

將 /etc/hosts 文件修改成格式化文件（帶域名就三列，不帶域名則兩列就行）

從 /etc/hosts 文件可以看出每臺虛擬機的主機名為 rhel7pgxxx

# cat /etc/hosts
127.0.0.1              localhost
192.168.122.1          station90
192.168.122.170        rhel7pg170
192.168.122.171        rhel7pg171
192.168.122.172        rhel7pg172
192.168.122.173        rhel7pg173
192.168.122.179        rhel7pg179
192.168.122.189        rhel7pg189
192.168.122.100        openfiler100
192.168.122.181        datan01
192.168.122.182        datan02
192.168.122.183        datan03

2. 安全設置

對每個虛擬機關閉selinux，關閉防火墻

setenforce 0
sed -i.bak "s/SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config
systemctl disable firewalld.service
systemctl stop firewalld.service
iptables --flush

3. 本地yum服務配置

掛載本地cdrom中的操作系統ISO到本地目錄

mkdir -p /mnt/iso
mount /dev/cdrom /mnt/iso
# 寫入fstab，下次重起操作系統的時候自動掛載
echo "/dev/cdrom    /mnt/iso    iso9660    defaults    0 0" >> /etc/fstab

創建本地yum源

vi /etc/yum.repos.d/base.repo
cat /etc/yum.repos.d/base.repo
[rhel7]
name=rhel7
baseurl=file:///mnt/iso
gpgcheck=0

[rhel7-HA]
name=rhel7-HA
baseurl=file:///mnt/iso/addons/HighAvailability
gpgcheck=0

[rhel7-RS]
name=rhel7-RS
baseurl=file:///mnt/iso/addons/ResilientStorage

更新yum服務信息

yum clean all
yum list
yum group list

4. 時間同步服務配置

安裝chrony包

yum install chrony.x86_64 -y

編輯配置文件，注釋掉默認的server，添加已知可用的或者自建的時間服務器，本實驗在openfiler的虛擬機192.168.122.100通過ntp發布了一個時間同步源

vi /etc/chrony.conf
# server 0.rhel.pool.ntp.org iburst
# server 1.rhel.pool.ntp.org iburst
# server 2.rhel.pool.ntp.org iburst
# server 3.rhel.pool.ntp.org iburst
server 192.168.122.100 iburst

重啟時間同步服務：

systemctl restart chronyd.service

查看時間同步狀態：

systemctl status chronyd.service

設置開機啟動服務：

systemctl enable chronyd.service

查看時間同步源：

chronyc sources -v

查看時間同步源狀態：

chronyc sourcestats -v

5. 重啟

重啟所有虛擬機，生效主機名和selinux的配置

init 6

二. postgres-xl軟件安裝 1. 依賴包的安裝

各種依賴包：

yum install -y make mpfr libmpc cpp kernel-headers glibc-headers glibc-devel libgomp libstdc++-devel libquadmath libgfortran libgnat libgnat-devel libobjc gcc gcc-c++ libquadmath-devel gcc-gfortran gcc-gnat gcc-objc gcc-objc++ ncurses-devel readline readline-devel zlib-devel m4 flex bison mailcap

perl的支持：

yum install -y perl 
perl-Carp 
perl-constant 
perl-Encode 
perl-Exporter 
perl-File-Path 
perl-File-Temp 
perl-Filter 
perl-Getopt-Long 
perl-HTTP-Tiny 
perl-libs 
perl-macros 
perl-parent 
perl-PathTools 
perl-Pod-Escapes 
perl-podlators 
perl-Pod-Perldoc 
perl-Pod-Simple 
perl-Pod-Usage 
perl-Scalar-List-Utils 
perl-Socket 
perl-Storable 
perl-Text-ParseWords 
perl-threads 
perl-threads-shared 
perl-Time-HiRes 
perl-Time-Local

2. postgres-xl主體的安裝

gunzip postgres-xl-9.5r1.4.tar.gz
tar -xvf postgres-xl-9.5r1.4.tar
cd postgres-xl-9.5r1.4
./configure
gmake
gmake install

3. pgxc_ctl插件的安裝

pgxc_ctl插件中，假如我們有需要配置備份配置文件的選項的話，需要修改下源代碼。postgres-xl-9.5r1.4/contrib/pgxc_ctl源代碼中do_command.c的static void init_all(void) 下面第二行，即第524行的init_gtm_master(true);前面，必須插入一行doConfigBackup();再保存編譯make&make install ，要不然用pgxc_ctl init all的時候，configBackup=y的功能沒辦法正常使用

cd postgres-xl-9.5r1.4/contrib/pgxc_ctl
vi do_command.c
make
make install

4. 用戶環境配置

此處環境變量要寫入 .bashrc 中，因為pgxc_ctl會通過ssh信任協議直接遠程到服務器上運行命令，這樣的話不會去讀取.bash_profile，只會讀取.bashrc，如果不把PATH等環境變量配置到.bashrc的化，之后初始化集群init all 的時候就會報“命令不存在”的錯誤。

/usr/sbin/groupadd -g 2001 postgres 
/usr/sbin/useradd -u 2001 -g postgres postgres 
echo "postgres_passwd" | passwd --stdin postgres
echo "export PGHOME=/usr/local/pgsql" >> /home/postgres/.bashrc
echo "export LD_LIBRARY_PATH==$PGHOME/lib" >> /home/postgres/.bashrc
echo "export PG_CONFIG=$PGHOME/bin/pg_config" >> /home/postgres/.bashrc
echo "export pg_config=$PGHOME/bin/pg_config" >> /home/postgres/.bashrc
echo "export PATH=$PATH:$PGHOME/bin" >> /home/postgres/.bashrc

5. 鏈接庫文件

source /home/postgres/.bash_profile
echo "$PGHOME/lib" >> /etc/ld.so.conf
/sbin/ldconfig
cat /etc/ld.so.conf

三. postgres-xl初始化 1. ssh互信配置

配置每個節點的postgres用戶互信
ssh互信配置方法非常多，可以參考《配置SSH互信》
http://blog.163.com/cao_jfeng...
我使用的是oracle的腳本

./sshUserSetup.sh -hosts "rhel7pg171 rhel7pg172 rhel7pg173 rhel7pg179 rhel7pg189" -user postgres -advanced -noPromptPassphrase -exverify

測試ssh互通

2. 創建PGDATA目錄

3臺datanode

mkdir -p /pgdata/datan01
mkdir -p /pgdata/datan02
mkdir -p /pgdata/datan03
mkdir -p /pgdata/coord01
mkdir -p /pgdata/coord02
mkdir -p /pgdata/coord03
mkdir -p /pgdata/gtm_pxy01
mkdir -p /pgdata/gtm_pxy02
mkdir -p /pgdata/gtm_pxy03

gtm master和gtm slave

mkdir -p /pgdata/gtm

所有節點

chown -R postgres:postgres /pgdata

3. datanode的特殊準備

用openfiler配置3個3GB的共享磁盤給datan01 datan02 datan03
在datan01 datan02 datan03上執行

systemctl enable iscsi
iscsiadm -m discovery -t sendtargets -p 10.10.10.100
iscsiadm -m node -T iqn.2006-01.com.openfiler:tsn.bf1f466b7eef -p 10.10.10.100 -l

在其中某個datanode上對共享磁盤進行分區，分成一個分區即可，并對其進行格式化

fdisk /dev/sda
fdisk /dev/sdb
fdisk /dev/sdc
partprobe /dev/sda
partprobe /dev/sdb
partprobe /dev/sdc
mkfs.xfs /dev/sda1
mkfs.xfs /dev/sdb1
mkfs.xfs /dev/sdc1
tune2fs -c 0 -i 0 /dev/sda1
tune2fs -c 0 -i 0 /dev/sdb1
tune2fs -c 0 -i 0 /dev/sdc1

重啟所有datanode進行重新識別

掛載測試

mount /dev/sda1 /pgdata/datan01/
mount /dev/sdb1 /pgdata/datan02/
mount /dev/sdc1 /pgdata/datan03/
umount  /dev/sda1
umount  /dev/sdb1
umount  /dev/sdc1

添加每個datanode的臨時ip和掛載文件系統

cd /etc/sysconfig/network-scripts/
cp -rp ifcfg-eth0 ifcfg-eth0:1
vi ifcfg-eth0:1
systemctl restart network
mount /dev/sdc1 /pgdata/datan03/

所有節點

chown -R postgres:postgres /pgdata

4. pgxc_ctl配置文件編寫

進入gtm_mast

su - postgres
pgxc_ctl
PGXC prepare
PGXC q
cd pgxc_ctl
vi pgxc_ctl.conf

編輯好的配置文件如下：

    #!/usr/bin/env bash
    #
    # Postgres-XC Configuration file for pgxc_ctl utility. 
    #
    # Configuration file can be specified as -c option from pgxc_ctl command.   Default is
    # $PGXC_CTL_HOME/pgxc_ctl.org.
    #
    # This is bash script so you can make any addition for your convenience to configure
    # your Postgres-XC cluster.
    #
    # Please understand that pgxc_ctl provides only a subset of configuration which pgxc_ctl
    # provide.  Here"s several several assumptions/restrictions pgxc_ctl depends on.
    #
    # 1) All the resources of pgxc nodes has to be owned by the same user.   Same user means
    #    user with the same user name.  User ID may be different from server to server.
    #    This must be specified as a variable $pgxcOwner.
    #
    # 2) All the servers must be reacheable via ssh without password.   It is highly recommended
    #    to setup key-based authentication among all the servers.
    #
    # 3) All the databases in coordinator/datanode has at least one same superuser.  Pgxc_ctl
    #    uses this user to connect to coordinators and datanodes.   Again, no password should
    #    be used to connect.  You have many options to do this, pg_hba.conf, pg_ident.conf and
    #    others.  Pgxc_ctl provides a way to configure pg_hba.conf but not pg_ident.conf.   This
    #    will be implemented in the later releases.
    #
    # 4) Gtm master and slave can have different port to listen, while coordinator and datanode
    #    slave should be assigned the same port number as master.
    #
    # 5) Port nuber of a coordinator slave must be the same as its master.
    #
    # 6) Master and slave are connected using synchronous replication.  Asynchronous replication
    #    have slight (almost none) chance to bring total cluster into inconsistent state.
    #    This chance is very low and may be negligible.  Support of asynchronous replication
    #    may be supported in the later release.
    #
    # 7) Each coordinator and datanode can have only one slave each.  Cascaded replication and
    #    multiple slave are not supported in the current pgxc_ctl.
    #
    # 8) Killing nodes may end up with IPC resource leak, such as semafor and shared memory.
    #    Only listening port (socket) will be cleaned with clean command.
    #
    # 9) Backup and restore are not supported in pgxc_ctl at present.   This is a big task and
    #    may need considerable resource.
    #
    #========================================================================================
    #
    #
    # pgxcInstallDir variable is needed if you invoke "deploy" command from pgxc_ctl utility.
    # If don"t you don"t need this variable.
    pgxcInstallDir=/usr/local/pgsql
    #---- OVERALL -----------------------------------------------------------------------------
    #
    pgxcOwner=postgres            # owner of the Postgres-XC databaseo cluster.  Here, we use this
                            # both as linus user and database user.  This must be
                            # the super user of each coordinator and datanode.
    pgxcUser=$pgxcOwner        # OS user of Postgres-XC owner
    
    tmpDir=/tmp                    # temporary dir used in XC servers
    localTmpDir=$tmpDir            # temporary dir used here locally
    
    configBackup=y                    # If you want config file backup, specify y to this value.
    configBackupHost=192.168.122.189    # host to backup config file
    configBackupDir=/home/postgres/pgxc_ctl        # Backup directory
    configBackupFile=pgxc_ctl.conf    # Backup file name --> Need to synchronize when original changed.
    
    #---- GTM ------------------------------------------------------------------------------------
    
    # GTM is mandatory.  You must have at least (and only) one GTM master in your Postgres-XC cluster.
    # If GTM crashes and you need to reconfigure it, you can do it by pgxc_update_gtm command to update
    # GTM master with others.   Of course, we provide pgxc_remove_gtm command to remove it.  This command
    # will not stop the current GTM.  It is up to the operator.
    
    
    #---- GTM Master -----------------------------------------------
    
    #---- Overall ----
    gtmName=gtm_mast
    gtmMasterServer=192.168.122.179
    gtmMasterPort=20001
    gtmMasterDir=/pgdata/gtm/data
    
    #---- Configuration ---
    gtmExtraConfig=none            # Will be added gtm.conf for both Master and Slave (done at initilization only)
    gtmMasterSpecificExtraConfig=none    # Will be added to Master"s gtm.conf (done at initialization only)
    
    #---- GTM Slave -----------------------------------------------
    
    # Because GTM is a key component to maintain database consistency, you may want to configure GTM slave
    # for backup.
    
    #---- Overall ------
    gtmSlave=y                    # Specify y if you configure GTM Slave.   Otherwise, GTM slave will not be configured and
                                # all the following variables will be reset.
    gtmSlaveName=gtm_slav
    gtmSlaveServer=192.168.122.189        # value none means GTM slave is not available.  Give none if you don"t configure GTM Slave.
    gtmSlavePort=20001            # Not used if you don"t configure GTM slave.
    gtmSlaveDir=/pgdata/gtm/data    # Not used if you don"t configure GTM slave.
    # Please note that when you have GTM failover, then there will be no slave available until you configure the slave
    # again. (pgxc_add_gtm_slave function will handle it)
    
    #---- Configuration ----
    gtmSlaveSpecificExtraConfig=none # Will be added to Slave"s gtm.conf (done at initialization only)
    
    #---- GTM Proxy -------------------------------------------------------------------------------------------------------
    # GTM proxy will be selected based upon which server each component runs on.
    # When fails over to the slave, the slave inherits its master"s gtm proxy.  It should be
    # reconfigured based upon the new location.
    #
    # To do so, slave should be restarted.   So pg_ctl promote -> (edit postgresql.conf and recovery.conf) -> pg_ctl restart
    #
    # You don"t have to configure GTM Proxy if you dont" configure GTM slave or you are happy if every component connects
    # to GTM Master directly.  If you configure GTL slave, you must configure GTM proxy too.
    
    #---- Shortcuts ------
    gtmProxyDir=/pgdata/gtm_pxy
    
    #---- Overall -------
    gtmProxy=y                # Specify y if you conifugre at least one GTM proxy.   You may not configure gtm proxies
                            # only when you dont" configure GTM slaves.
                            # If you specify this value not to y, the following parameters will be set to default empty values.
                            # If we find there"re no valid Proxy server names (means, every servers are specified
                            # as none), then gtmProxy value will be set to "n" and all the entries will be set to
                            # empty values.
    gtmProxyNames=(gtm_pxy01 gtm_pxy02 gtm_pxy03)    # No used if it is not configured
    gtmProxyServers=(192.168.122.171 192.168.122.172 192.168.122.173)        # Specify none if you dont" configure it.
    gtmProxyPorts=(20001 20001 20001)                # Not used if it is not configured.
    gtmProxyDirs=($gtmProxyDir"01/data" $gtmProxyDir"02/data" $gtmProxyDir"03/data")# Not used if it is not configured.
    
    #---- Configuration ----
    gtmPxyExtraConfig=none        # Extra configuration parameter for gtm_proxy.  Coordinator section has an example.
    gtmPxySpecificExtraConfig=(none none none)
    
    #---- Coordinators ----------------------------------------------------------------------------------------------------
    
    #---- shortcuts ----------
    coordMasterDir=/pgdata/coord
    ##coordSlaveDir=$HOME/pgxc/nodes/coord_slave
    ##coordArchLogDir=$HOME/pgxc/nodes/coord_archlog
    
    #---- Overall ------------
    coordNames=(coord01 coord02 coord03)        # Master and slave use the same name
    coordPorts=(15432 15432 15432)            # Master ports
    poolerPorts=(40101 40102 40103)            # Master pooler ports
    coordPgHbaEntries=(0.0.0.0/0)                # Assumes that all the coordinator (master/slave) accepts
                                            # the same connection
                                            # This entry allows only $pgxcOwner to connect.
                                            # If you"d like to setup another connection, you should
                                            # supply these entries through files specified below.
    # Note: The above parameter is extracted as "host all all 0.0.0.0/0 trust".   If you don"t want
    # such setups, specify the value () to this variable and suplly what you want using coordExtraPgHba
    # and/or coordSpecificExtraPgHba variables.
    #coordPgHbaEntries=(::1/128)    # Same as above but for IPv6 addresses
    
    #---- Master -------------
    coordMasterServers=(192.168.122.171 192.168.122.172 192.168.122.173)        # none means this master is not available
    coordMasterDirs=($coordMasterDir"01/data" $coordMasterDir"02/data" $coordMasterDir"03/data")
    coordMaxWALsernder=0    # max_wal_senders: needed to configure slave. If zero value is specified,
                            # it is expected to supply this parameter explicitly by external files
                            # specified in the following.    If you don"t configure slaves, leave this value to zero.
    coordMaxWALSenders=(0 0 0)
                            # max_wal_senders configuration for each coordinator.
    
    #---- Slave -------------
    coordSlave=n            # Specify y if you configure at least one coordiantor slave.  Otherwise, the following
                            # configuration parameters will be set to empty values.
                            # If no effective server names are found (that is, every servers are specified as none),
                            # then coordSlave value will be set to n and all the following values will be set to
                            # empty values.
    ##coordSlaveSync=y        # Specify to connect with synchronized mode.
    ##coordSlaveServers=(node07 node08 node09 node06)            # none means this slave is not available
    ##coordSlavePorts=(20004 20005 20004 20005)            # Master ports
    ##coordSlavePoolerPorts=(20010 20011 20010 20011)            # Master pooler ports
    ##coordSlaveDirs=($coordSlaveDir $coordSlaveDir $coordSlaveDir $coordSlaveDir)
    ##coordArchLogDirs=($coordArchLogDir $coordArchLogDir $coordArchLogDir $coordArchLogDir)
    
    #---- Configuration files---
    # Need these when you"d like setup specific non-default configuration 
    # These files will go to corresponding files for the master.
    # You may supply your bash script to setup extra config lines and extra pg_hba.conf entries 
    # Or you may supply these files manually.
    coordExtraConfig=coordExtraConfig    # Extra configuration file for coordinators.  
                            # This file will be added to all the coordinators"
                            # postgresql.conf
    # Pleae note that the following sets up minimum parameters which you may want to change.
    # You can put your postgresql.conf lines here.
    cat > $coordExtraConfig <> ========================================================
    # You can setup more than one backup set for various purposes, such as disaster recovery.
    ##walArchiveSet=(war1 war2)
    ##war1_source=(master)    # you can specify master, slave or ano other additional slaves as a source of WAL archive.
                        # Default is the master
    ##wal1_source=(slave)
    ##wal1_source=(additiona_coordinator_slave_set additional_datanode_slave_set)
    ##war1_host=node10    # All the nodes are backed up at the same host for a given archive set
    ##war1_backupdir=$HOME/pgxc/backup_war1
    ##wal2_source=(master)
    ##war2_host=node11
    ##war2_backupdir=$HOME/pgxc/backup_war2
    #=============<< End of future extension demonistration >> ========================================================

5. 通過pgxc_ctl進行初始化

進入gtm_mast
在postgres用戶下使用 pgxc_ctl init all 命令進行初始化以下是輸出結果：

# su - postgres
# pgxc_ctl init all
/bin/bash
Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.
Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.
Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf
Finished reading configuration.
******** PGXC_CTL START ***************

Current directory: /home/postgres/pgxc_ctl
pgxc_ctl.conf 100% 17KB 17.3KB/s 00:00
Initialize GTM master
The files belonging to this GTM system will be owned by user "postgres".
This user must also own the server process.

fixing permissions on existing directory /pgdata/gtm/data ... ok
creating configuration files ... ok
creating control file ... ok

Success.
waiting for server to shut down.... done
server stopped
Done.
Start GTM master
server starting
Initialize GTM slave
The files belonging to this GTM system will be owned by user "postgres".
This user must also own the server process.

fixing permissions on existing directory /pgdata/gtm/data ... ok
creating configuration files ... ok
creating control file ... ok

Success.
Done.
Start GTM slaveserver starting
Done.
Initialize all the gtm proxies.
Initializing gtm proxy gtm_pxy01.
Initializing gtm proxy gtm_pxy02.
Initializing gtm proxy gtm_pxy03.
The files belonging to this GTM system will be owned by user "postgres".
This user must also own the server process.

fixing permissions on existing directory /pgdata/gtm_pxy01/data ... ok
creating configuration files ... ok

Success.
The files belonging to this GTM system will be owned by user "postgres".
This user must also own the server process.

fixing permissions on existing directory /pgdata/gtm_pxy02/data ... ok
creating configuration files ... ok

Success.
The files belonging to this GTM system will be owned by user "postgres".
This user must also own the server process.

fixing permissions on existing directory /pgdata/gtm_pxy03/data ... ok
creating configuration files ... ok

Success.
Done.
Starting all the gtm proxies.
Starting gtm proxy gtm_pxy01.
Starting gtm proxy gtm_pxy02.
Starting gtm proxy gtm_pxy03.
server starting
server starting
server starting
Done.
Initialize all the coordinator masters.
Initialize coordinator master coord01.
Initialize coordinator master coord02.
Initialize coordinator master coord03.
The files belonging to this database system will be owned by user "postgres".
This user must also own the server process.

The database cluster will be initialized with locale "zh_CN.UTF-8".
The default database encoding has accordingly been set to "UTF8".
initdb: could not find suitable text search configuration for locale "zh_CN.UTF-8"
The default text search configuration will be set to "simple".

Data page checksums are disabled.

fixing permissions on existing directory /pgdata/coord01/data ... ok
creating subdirectories ... ok
selecting default max_connections ... 100
selecting default shared_buffers ... 128MB
selecting dynamic shared memory implementation ... posix
creating configuration files ... ok
creating template1 database in /pgdata/coord01/data/base/1 ... ok
initializing pg_authid ... ok
initializing dependencies ... ok
creating system views ... ok
creating cluster information ... ok
loading system objects" descriptions ... ok
creating collations ... ok
creating conversions ... ok
creating dictionaries ... ok
setting privileges on built-in objects ... ok
creating information schema ... ok
loading PL/pgSQL server-side language ... ok
vacuuming database template1 ... ok
copying template1 to template0 ... ok
copying template1 to postgres ... ok
syncing data to disk ... ok
freezing database template0 ... ok
freezing database template1 ... ok
freezing database postgres ... ok