摘要：都出了，自然我是要安裝的，上次寫的那個編譯開發環境并沒有針對性的說，就這次說清楚吧。好了，到這里其實已經沒有問題了。

PHP7都出了，自然我是要安裝的，上次寫的那個編譯開發環境并沒有針對性的說PHP，就這次說清楚吧。

$ wget http://cn2.php.net/get/php-7.0.0.tar.gz/from/this/mirror
$ mv mirror php7.tar.gz

$ tar -zxvf php7.tar.gz
$ cd php7

$ sudo apt-get install libxml2-dev

$ sudo apt-get install libcurl4-openssl-dev

$ sudo apt-get install curl libmcrypt-dev

configure: error: png.h not found.

$ sudo apt-get install libpng12-dev

$ ./configure --enable-debug --with-mysql --with-gd --with-curl --prefix=/opt/php7 --enable-fpm --enable-cgi --with-openssl --enable-mbstring --with-mcrypt --with-pdo-mysql --with-mysql-sock=/var/run/mysqld/mysqld.sock
$ make -j 4
$ sudo make install

$ cd ~
$ vim .zshrc # 或者其他的.bashrc什么的

加入以下內容在最后一行:

$PATH=$PATH:/opt/php7/bin;

這個步驟比較長，得有點兒耐心

首先找個php.ini文件，然后放到/opt/php7/lib里面，然后

給兩個文件改名

$ suo cp /opt/php7/etc/php-fpm.conf.default /opt/php7/etc/php-fpm.conf
$ suo cp /opt/php7/etc/php-fpm.d/www.conf.default /opt/php7/etc/php-fpm.d/www.conf

然后調整里面的東西

先給個pid取消注釋

$ sudo vim /opt/php7/etc/php7-fpm.conf

[...]
pid = run/php-fpm.pid
[...]

改一下用戶組和用戶

$ sudo vim /opt/php7/etc/php7-fpm.d/www.conf

user = YourUsername
group = YourGroup

然后創建文件：

$ sudo vim /etc/init.d/php7-fpm

寫入以下內容，注意一些文件名

#! /bin/sh
### BEGIN INIT INFO
# Provides:          php7-fpm
# Required-Start:    $all
# Required-Stop:     $all
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: starts php7-fpm
# Description:       starts the PHP FastCGI Process Manager daemon
### END INIT INFO
php_fpm_BIN=/opt/php7/sbin/php-fpm
php_fpm_CONF=/opt/php7/etc/php-fpm.conf
php_fpm_PID=/opt/php7/var/run/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF"
wait_for_pid () {
        try=0
        while test $try -lt 35 ; do
                case "$1" in
                        "created")
                        if [ -f "$2" ] ; then
                                try=""
                                break
                        fi
                        ;;
                        "removed")
                        if [ ! -f "$2" ] ; then
                                try=""
                                break
                        fi
                        ;;
                esac
                echo -n .
                try=`expr $try + 1`
                sleep 1
        done
}
case "$1" in
        start)
                echo -n "Starting php-fpm "
                $php_fpm_BIN $php_opts
                if [ "$?" != 0 ] ; then
                        echo " failed"
                        exit 1
                fi
                wait_for_pid created $php_fpm_PID
                if [ -n "$try" ] ; then
                        echo " failed"
                        exit 1
                else
                        echo " done"
                fi
        ;;
        stop)
                echo -n "Gracefully shutting down php-fpm "
                if [ ! -r $php_fpm_PID ] ; then
                        echo "warning, no pid file found - php-fpm is not running ?"
                        exit 1
                fi
                kill -QUIT `cat $php_fpm_PID`
                wait_for_pid removed $php_fpm_PID
                if [ -n "$try" ] ; then
                        echo " failed. Use force-exit"
                        exit 1
                else
                        echo " done"
                       echo " done"
                fi
        ;;
        force-quit)
                echo -n "Terminating php-fpm "
                if [ ! -r $php_fpm_PID ] ; then
                        echo "warning, no pid file found - php-fpm is not running ?"
                        exit 1
                fi
                kill -TERM `cat $php_fpm_PID`
                wait_for_pid removed $php_fpm_PID
                if [ -n "$try" ] ; then
                        echo " failed"
                        exit 1
                else
                        echo " done"
                fi
        ;;
        restart)
                $0 stop
                $0 start
        ;;
        reload)
                echo -n "Reload service php-fpm "
                if [ ! -r $php_fpm_PID ] ; then
                        echo "warning, no pid file found - php-fpm is not running ?"
                        exit 1
                fi
                kill -USR2 `cat $php_fpm_PID`
                echo " done"
        ;;
        *)
                echo "Usage: $0 {start|stop|force-quit|restart|reload}"
                exit 1
        ;;
esac

賦權：

$ sudo chmod 755 /etc/init.d/php7-fpm
$ sudo vim /lib/systemd/system/php7-fpm.service

然后寫入下面的內容：

[Unit]
Description=The PHP 7 FastCGI Process Manager
After=network.target

[Service]
Type=simple
PIDFile=/opt/php7/var/run/php-fpm.pid
ExecStart=/opt/php7/sbin/php-fpm --nodaemonize --fpm-config /opt/php7/etc/php-fpm.conf
ExecReload=/bin/kill -USR2 $MAINPID

[Install]
WantedBy=multi-user.target

試試看行不行：

$ php -v
$ sudo /etc/init.d/php-fpm start

沒有出錯就對了，出錯了請?jiān)谙旅媪粞裕铱纯丛趺椿厥隆?/p>

好了，到這里其實已經沒有問題了。但是剩下的Nginx也得稍微調整一下

$ sudo vim /etc/nginx/site-available/default

改成這樣

fastcgi_pass 127.0.0.1:9000

重啟服務，走起！

$ sudo service nginx restart
$ sudo service php7-fpm restart

按照他們的指導做就行了

$ git clone https://github.com/swoole/swoole-src.git
$ cd swoole-src
$ phpize
$ ./configure
$ make && sudo make install

在php.ini里面寫上擴展

$ sudo vim /opt/php7/lib/php.ini

隨便找個地方，不過我還是建議放到extension那邊，大概第900行左右

extension=swoole.so

試試看swoole有沒有安裝好

$ php -m | grep swoole

有輸出就是沒問題，沒輸出就是有問題。

How to install PHP 5.3 and 5.2 together on Ubuntu 12.04

How to install PHP 7 as PHP-FPM & FastCGI for ISPConfig 3 on Debian 8 (Jessie)

swoole Readme