国产xxxx99真实实拍_久久不雅视频_高清韩国a级特黄毛片_嗯老师别我我受不了了小说

資訊專欄INFORMATION COLUMN

k8s與監控--解讀prometheus監控kubernetes的配置文件

UCloud / 3119人閱讀

摘要:前言是一個開源和社區驅動的監控報警時序數據庫的項目。集群上部署的應用監控部署在集群上的應用。通過和的接口采集。相應,配置文件官方也提供了一份,今天我們就解讀一下該配置文件。對于服務的終端節點,也需要加注解,為則會將作為監控目標。

前言

Prometheus 是一個開源和社區驅動的監控&報警&時序數據庫的項目。來源于谷歌BorgMon項目?,F(xiàn)在最常見的Kubernetes容器管理系統中,通常會搭配Prometheus進行監控。主要監控:

Node:如主機CPU,內存,網絡吞吐和帶寬占用,磁盤I/O和磁盤使用等指標。node-exporter采集。

容器關鍵指標:集群中容器的CPU詳細狀況,內存詳細狀況,Network,F(xiàn)ileSystem和Subcontainer等。通過cadvisor采集。

Kubernetes集群上部署的應用:監控部署在Kubernetes集群上的應用。主要是pod,service,ingress和endpoint。通過black-box和kube-apiserver的接口采集。

prometheus自身提供了一些資源的自動發現功能,下面是我從官方github上截圖,羅列了目前提供的資源發現:

由上圖可知prometheus自身提供了自動發現kubernetes的監控目標的功能。相應,配置文件官方也提供了一份,今天我們就解讀一下該配置文件。

配置文件解讀

首先直接上官方的配置文件:

# A scrape configuration for running Prometheus on a Kubernetes cluster.
# This uses separate scrape configs for cluster components (i.e. API server, node)
# and services to allow each to use different authentication configs.
#
# Kubernetes labels will be added as Prometheus labels on metrics via the
# `labelmap` relabeling action.
#
# If you are using Kubernetes 1.7.2 or earlier, please take note of the comments
# for the kubernetes-cadvisor job; you will need to edit or remove this job.

# Scrape config for API servers.
#
# Kubernetes exposes API servers as endpoints to the default/kubernetes
# service so this uses `endpoints` role and uses relabelling to only keep
# the endpoints associated with the default/kubernetes service using the
# default named port `https`. This works for single API server deployments as
# well as HA API server deployments.
scrape_configs:
- job_name: "kubernetes-apiservers"

  kubernetes_sd_configs:
  - role: endpoints

  # Default to scraping over https. If required, just disable this or change to
  # `http`.
  scheme: https

  # This TLS & bearer token file config is used to connect to the actual scrape
  # endpoints for cluster components. This is separate to discovery auth
  # configuration because discovery & scraping are two separate concerns in
  # Prometheus. The discovery auth config is automatic if Prometheus runs inside
  # the cluster. Otherwise, more config options have to be provided within the
  # .
  tls_config:
    ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
    # If your node certificates are self-signed or use a different CA to the
    # master CA, then disable certificate verification below. Note that
    # certificate verification is an integral part of a secure infrastructure
    # so this should only be disabled in a controlled environment. You can
    # disable certificate verification by uncommenting the line below.
    #
    # insecure_skip_verify: true
  bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token

  # Keep only the default/kubernetes service endpoints for the https port. This
  # will add targets for each API server which Kubernetes adds an endpoint to
  # the default/kubernetes service.
  relabel_configs:
  - source_labels: [__meta_kubernetes_namespace, __meta_kubernetes_service_name, __meta_kubernetes_endpoint_port_name]
    action: keep
    regex: default;kubernetes;https

# Scrape config for nodes (kubelet).
#
# Rather than connecting directly to the node, the scrape is proxied though the
# Kubernetes apiserver.  This means it will work if Prometheus is running out of
# cluster, or can"t connect to nodes for some other reason (e.g. because of
# firewalling).
- job_name: "kubernetes-nodes"

  # Default to scraping over https. If required, just disable this or change to
  # `http`.
  scheme: https

  # This TLS & bearer token file config is used to connect to the actual scrape
  # endpoints for cluster components. This is separate to discovery auth
  # configuration because discovery & scraping are two separate concerns in
  # Prometheus. The discovery auth config is automatic if Prometheus runs inside
  # the cluster. Otherwise, more config options have to be provided within the
  # .
  tls_config:
    ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
  bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token

  kubernetes_sd_configs:
  - role: node

  relabel_configs:
  - action: labelmap
    regex: __meta_kubernetes_node_label_(.+)
  - target_label: __address__
    replacement: kubernetes.default.svc:443
  - source_labels: [__meta_kubernetes_node_name]
    regex: (.+)
    target_label: __metrics_path__
    replacement: /api/v1/nodes/${1}/proxy/metrics

# Scrape config for Kubelet cAdvisor.
#
# This is required for Kubernetes 1.7.3 and later, where cAdvisor metrics
# (those whose names begin with "container_") have been removed from the
# Kubelet metrics endpoint.  This job scrapes the cAdvisor endpoint to
# retrieve those metrics.
#
# In Kubernetes 1.7.0-1.7.2, these metrics are only exposed on the cAdvisor
# HTTP endpoint; use "replacement: /api/v1/nodes/${1}:4194/proxy/metrics"
# in that case (and ensure cAdvisor"s HTTP server hasn"t been disabled with
# the --cadvisor-port=0 Kubelet flag).
#
# This job is not necessary and should be removed in Kubernetes 1.6 and
# earlier versions, or it will cause the metrics to be scraped twice.
- job_name: "kubernetes-cadvisor"

  # Default to scraping over https. If required, just disable this or change to
  # `http`.
  scheme: https

  # This TLS & bearer token file config is used to connect to the actual scrape
  # endpoints for cluster components. This is separate to discovery auth
  # configuration because discovery & scraping are two separate concerns in
  # Prometheus. The discovery auth config is automatic if Prometheus runs inside
  # the cluster. Otherwise, more config options have to be provided within the
  # .
  tls_config:
    ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
  bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token

  kubernetes_sd_configs:
  - role: node

  relabel_configs:
  - action: labelmap
    regex: __meta_kubernetes_node_label_(.+)
  - target_label: __address__
    replacement: kubernetes.default.svc:443
  - source_labels: [__meta_kubernetes_node_name]
    regex: (.+)
    target_label: __metrics_path__
    replacement: /api/v1/nodes/${1}/proxy/metrics/cadvisor

# Scrape config for service endpoints.
#
# The relabeling allows the actual service scrape endpoint to be configured
# via the following annotations:
#
# * `prometheus.io/scrape`: Only scrape services that have a value of `true`
# * `prometheus.io/scheme`: If the metrics endpoint is secured then you will need
# to set this to `https` & most likely set the `tls_config` of the scrape config.
# * `prometheus.io/path`: If the metrics path is not `/metrics` override this.
# * `prometheus.io/port`: If the metrics are exposed on a different port to the
# service then set this appropriately.
- job_name: "kubernetes-service-endpoints"

  kubernetes_sd_configs:
  - role: endpoints

  relabel_configs:
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scrape]
    action: keep
    regex: true
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_scheme]
    action: replace
    target_label: __scheme__
    regex: (https?)
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_path]
    action: replace
    target_label: __metrics_path__
    regex: (.+)
  - source_labels: [__address__, __meta_kubernetes_service_annotation_prometheus_io_port]
    action: replace
    target_label: __address__
    regex: ([^:]+)(?::d+)?;(d+)
    replacement: $1:$2
  - action: labelmap
    regex: __meta_kubernetes_service_label_(.+)
  - source_labels: [__meta_kubernetes_namespace]
    action: replace
    target_label: kubernetes_namespace
  - source_labels: [__meta_kubernetes_service_name]
    action: replace
    target_label: kubernetes_name

# Example scrape config for probing services via the Blackbox Exporter.
#
# The relabeling allows the actual service scrape endpoint to be configured
# via the following annotations:
#
# * `prometheus.io/probe`: Only probe services that have a value of `true`
- job_name: "kubernetes-services"

  metrics_path: /probe
  params:
    module: [http_2xx]

  kubernetes_sd_configs:
  - role: service

  relabel_configs:
  - source_labels: [__meta_kubernetes_service_annotation_prometheus_io_probe]
    action: keep
    regex: true
  - source_labels: [__address__]
    target_label: __param_target
  - target_label: __address__
    replacement: blackbox-exporter.example.com:9115
  - source_labels: [__param_target]
    target_label: instance
  - action: labelmap
    regex: __meta_kubernetes_service_label_(.+)
  - source_labels: [__meta_kubernetes_namespace]
    target_label: kubernetes_namespace
  - source_labels: [__meta_kubernetes_service_name]
    target_label: kubernetes_name

# Example scrape config for probing ingresses via the Blackbox Exporter.
#
# The relabeling allows the actual ingress scrape endpoint to be configured
# via the following annotations:
#
# * `prometheus.io/probe`: Only probe services that have a value of `true`
- job_name: "kubernetes-ingresses"

  metrics_path: /probe
  params:
    module: [http_2xx]

  kubernetes_sd_configs:
    - role: ingress

  relabel_configs:
    - source_labels: [__meta_kubernetes_ingress_annotation_prometheus_io_probe]
      action: keep
      regex: true
    - source_labels: [__meta_kubernetes_ingress_scheme,__address__,__meta_kubernetes_ingress_path]
      regex: (.+);(.+);(.+)
      replacement: ${1}://${2}${3}
      target_label: __param_target
    - target_label: __address__
      replacement: blackbox-exporter.example.com:9115
    - source_labels: [__param_target]
      target_label: instance
    - action: labelmap
      regex: __meta_kubernetes_ingress_label_(.+)
    - source_labels: [__meta_kubernetes_namespace]
      target_label: kubernetes_namespace
    - source_labels: [__meta_kubernetes_ingress_name]
      target_label: kubernetes_name

# Example scrape config for pods
#
# The relabeling allows the actual pod scrape endpoint to be configured via the
# following annotations:
#
# * `prometheus.io/scrape`: Only scrape pods that have a value of `true`
# * `prometheus.io/path`: If the metrics path is not `/metrics` override this.
# * `prometheus.io/port`: Scrape the pod on the indicated port instead of the
# pod"s declared ports (default is a port-free target if none are declared).
- job_name: "kubernetes-pods"

  kubernetes_sd_configs:
  - role: pod

  relabel_configs:
  - source_labels: [__meta_kubernetes_pod_annotation_prometheus_io_scrape]
    action: keep
    regex: true
  - source_labels: [__meta_kubernetes_pod_annotation_prometheus_io_path]
    action: replace
    target_label: __metrics_path__
    regex: (.+)
  - source_labels: [__address__, __meta_kubernetes_pod_annotation_prometheus_io_port]
    action: replace
    regex: ([^:]+)(?::d+)?;(d+)
    replacement: $1:$2
    target_label: __address__
  - action: labelmap
    regex: __meta_kubernetes_pod_label_(.+)
  - source_labels: [__meta_kubernetes_namespace]
    action: replace
    target_label: kubernetes_namespace
  - source_labels: [__meta_kubernetes_pod_name]
    action: replace
    target_label: kubernetes_pod_name

當然該配置文件,是在prometheus部署在k8s中生效的,即in-cluster模式。

kubernetes-apiservers

該項主要是讓prometheus程序可以訪問kube-apiserver,進而進行服務發現??匆幌路?wù)發現的代碼可以看出,主要服務發現:node,service,ingress,pod。

    switch d.role {
    case "endpoints":
        var wg sync.WaitGroup

        for _, namespace := range namespaces {
            elw := cache.NewListWatchFromClient(rclient, "endpoints", namespace, nil)
            slw := cache.NewListWatchFromClient(rclient, "services", namespace, nil)
            plw := cache.NewListWatchFromClient(rclient, "pods", namespace, nil)
            eps := NewEndpoints(
                log.With(d.logger, "role", "endpoint"),
                cache.NewSharedInformer(slw, &apiv1.Service{}, resyncPeriod),
                cache.NewSharedInformer(elw, &apiv1.Endpoints{}, resyncPeriod),
                cache.NewSharedInformer(plw, &apiv1.Pod{}, resyncPeriod),
            )
            go eps.endpointsInf.Run(ctx.Done())
            go eps.serviceInf.Run(ctx.Done())
            go eps.podInf.Run(ctx.Done())

            for !eps.serviceInf.HasSynced() {
                time.Sleep(100 * time.Millisecond)
            }
            for !eps.endpointsInf.HasSynced() {
                time.Sleep(100 * time.Millisecond)
            }
            for !eps.podInf.HasSynced() {
                time.Sleep(100 * time.Millisecond)
            }
            wg.Add(1)
            go func() {
                defer wg.Done()
                eps.Run(ctx, ch)
            }()
        }
        wg.Wait()
    case "pod":
        var wg sync.WaitGroup
        for _, namespace := range namespaces {
            plw := cache.NewListWatchFromClient(rclient, "pods", namespace, nil)
            pod := NewPod(
                log.With(d.logger, "role", "pod"),
                cache.NewSharedInformer(plw, &apiv1.Pod{}, resyncPeriod),
            )
            go pod.informer.Run(ctx.Done())

            for !pod.informer.HasSynced() {
                time.Sleep(100 * time.Millisecond)
            }
            wg.Add(1)
            go func() {
                defer wg.Done()
                pod.Run(ctx, ch)
            }()
        }
        wg.Wait()
    case "service":
        var wg sync.WaitGroup
        for _, namespace := range namespaces {
            slw := cache.NewListWatchFromClient(rclient, "services", namespace, nil)
            svc := NewService(
                log.With(d.logger, "role", "service"),
                cache.NewSharedInformer(slw, &apiv1.Service{}, resyncPeriod),
            )
            go svc.informer.Run(ctx.Done())

            for !svc.informer.HasSynced() {
                time.Sleep(100 * time.Millisecond)
            }
            wg.Add(1)
            go func() {
                defer wg.Done()
                svc.Run(ctx, ch)
            }()
        }
        wg.Wait()
    case "ingress":
        var wg sync.WaitGroup
        for _, namespace := range namespaces {
            ilw := cache.NewListWatchFromClient(reclient, "ingresses", namespace, nil)
            ingress := NewIngress(
                log.With(d.logger, "role", "ingress"),
                cache.NewSharedInformer(ilw, &extensionsv1beta1.Ingress{}, resyncPeriod),
            )
            go ingress.informer.Run(ctx.Done())

            for !ingress.informer.HasSynced() {
                time.Sleep(100 * time.Millisecond)
            }
            wg.Add(1)
            go func() {
                defer wg.Done()
                ingress.Run(ctx, ch)
            }()
        }
        wg.Wait()
    case "node":
        nlw := cache.NewListWatchFromClient(rclient, "nodes", api.NamespaceAll, nil)
        node := NewNode(
            log.With(d.logger, "role", "node"),
            cache.NewSharedInformer(nlw, &apiv1.Node{}, resyncPeriod),
        )
        go node.informer.Run(ctx.Done())

        for !node.informer.HasSynced() {
            time.Sleep(100 * time.Millisecond)
        }
        node.Run(ctx, ch)

    default:
        level.Error(d.logger).Log("msg", "unknown Kubernetes discovery kind", "role", d.role)
    }   
kubernetes-nodes

發現node以后,通過/api/v1/nodes/${1}/proxy/metrics來獲取node的metrics。

kubernetes-cadvisor

cadvisor已經被集成在kubelet中,所以發現了node就相當于發現了cadvisor。通過 /api/v1/nodes/${1}/proxy/metrics/cadvisor采集容器指標。

kubernetes-services和kubernetes-ingresses

該兩種資源監控方式差不多,都是需要安裝black-box,然后類似于探針去定時訪問,根據返回的http狀態碼來判定service和ingress的服務可用性。
PS:不過我自己在這里和官方的稍微有點區別,

- target_label: __address__
      replacement: blackbox-exporter.example.com:9115

官方大致是需要我們要?jiǎng)?chuàng)建black-box 的ingress從外部訪問,這樣從效率和安全性都不是最合適的。所以我一般都是直接內部dns訪問。如下

- target_label: __address__
      replacement: blackbox-exporter.kube-system:9115

當然看源碼可以發現,并不是所有的service和ingress都會健康監測,如果需要將服務進行健康監測,那么你部署應用的yaml文件加一些注解。例如:
對于service和ingress:
需要加注解:prometheus.io/scrape: "true"

apiVersion: v1
kind: Service
metadata:
  annotations:
    prometheus.io/scrape: "true"
  name: prometheus-node-exporter
  namespace: kube-system
  labels:
    app: prometheus
    component: node-exporter
spec:
  clusterIP: None
  ports:
    - name: prometheus-node-exporter
      port: 9100
      protocol: TCP
  selector:
    app: prometheus
    component: node-exporter
  type: ClusterIP
kubernetes-pods

對于pod的監測也是需要加注解:

prometheus.io/scrape,為true則會將pod作為監控目標。

prometheus.io/path,默認為/metrics

prometheus.io/port , 端口

所以看到此處可以看出,該job并不是監控pod的指標,pod已經通過前面的cadvisor采集。此處是對pod中應用的監控。寫過exporter的人應該對這個概念非常清楚。通俗講,就是你pod中的應用提供了prometheus的監控功能,加上對應的注解,那么該應用的metrics會定時被采集走。

kubernetes-service-endpoints

對于服務的終端節點,也需要加注解:

prometheus.io/scrape,為true則會將pod作為監控目標。

prometheus.io/path,默認為/metrics

prometheus.io/port , 端口

prometheus.io/scheme 默認http,如果為了安全設置了https,此處需要改為https

這個基本上同上的。采集service-endpoints的metrics。

個人認為:如果某些部署應用只有pod沒有service,那么這種情況只能在pod上加注解,通過kubernetes-pods采集metrics。如果有service,那么就無需在pod加注解了,直接在service上加即可。畢竟service-endpoints最終也會落到pod上。

總結 配置項總結

kubernetes-service-endpoints和kubernetes-pods采集應用中metrics,當然并不是所有的都提供了metrics接口。

kubernetes-ingresses 和kubernetes-services 健康監測服務和ingress健康的狀態

kubernetes-cadvisor 和 kubernetes-nodes,通過發現node,監控node 和容器的cpu等指標

自動發現源碼

參考client-go和prometheus自動發現k8s,這種監聽k8s集群中資源的變化,使用informer實現,不要輪詢kube-apiserver接口。

參考

該配置文件需要部署一些組件來支持prometheus對k8s的監控,例如black-exporter。因?yàn)橐詣?dòng)發現,獲取集群的一些信息,所以也要做rbac的授權。具體參考:
github

文章版權歸作者所有,未經允許請勿轉載,若此文章存在違規行為,您可以聯系管理員刪除。

轉載請注明本文地址:http://specialneedsforspecialkids.com/yun/32635.html

相關文章

  • k8s監控--從kubernetes監控prometheusfederation機制

    摘要:也就是說整個監控系統不是部署在中。非的怎么監控是今天需要討論的問題。官方給出的配置聯邦機制也實現了的擴展。我們的集群外監控的方案就基于此。在同一個數據中心,每個監控其他的。上一級的監控?cái)?shù)據中心級別的。 前言 有時候?qū)τ谝粋€(gè)公司,k8s集群或是所謂的caas只是整個技術體系的一部分,往往這個時候監控系統不僅僅要k8s集群以及k8s中部署的應用,而且要監控傳統部署的項目。也就是說整個監控系...

    wangym 評論0 收藏0
  • k8s監控--從kubernetes監控prometheusfederation機制

    摘要:也就是說整個監控系統不是部署在中。非的怎么監控是今天需要討論的問題。官方給出的配置聯邦機制也實現了的擴展。我們的集群外監控的方案就基于此。在同一個數據中心,每個監控其他的。上一級的監控?cái)?shù)據中心級別的。 前言 有時候?qū)τ谝粋€(gè)公司,k8s集群或是所謂的caas只是整個技術體系的一部分,往往這個時候監控系統不僅僅要k8s集群以及k8s中部署的應用,而且要監控傳統部署的項目。也就是說整個監控系...

    curlyCheng 評論0 收藏0
  • 容器監控實踐—Prometheus部署方案

    摘要:同時有權限控制日志審計整體配置過期時間等功能。將成為趨勢前置條件要求的版本應該是因?yàn)楹椭С值南拗频暮诵乃枷胧菍⒌牟渴鹋c它監控的對象的配置分離,做到部署與監控對象的配置分離之后,就可以輕松實現動態配置。 一.單獨部署 二進制安裝各版本下載地址:https://prometheus.io/download/ Docker運行 運行命令:docker run --name promet...

    GeekQiaQia 評論0 收藏0
  • 容器監控實踐—Prometheus配置服務發現

    摘要:一概述的配置可以用命令行參數或者配置文件,如果是在集群內,一般配置在中以下均為版本查看可用的命令行參數,可以執行也可以指定對應的配置文件,參數一般為如果配置有修改,如增添采集,可以重新加載它的配置。目前主要支持種服務發現模式,分別是。 本文將分析Prometheus的常見配置與服務發現,分為概述、配置詳解、服務發現、常見場景四個部分進行講解。 一. 概述 Prometheus的配置可以...

    longshengwang 評論0 收藏0
  • 容器監控實踐—Prometheus配置服務發現

    摘要:一概述的配置可以用命令行參數或者配置文件,如果是在集群內,一般配置在中以下均為版本查看可用的命令行參數,可以執行也可以指定對應的配置文件,參數一般為如果配置有修改,如增添采集,可以重新加載它的配置。目前主要支持種服務發現模式,分別是。 本文將分析Prometheus的常見配置與服務發現,分為概述、配置詳解、服務發現、常見場景四個部分進行講解。 一. 概述 Prometheus的配置可以...

    hiyang 評論0 收藏0

發表評論

0條評論

最新活動
閱讀需要支付1元查看
<