摘要:二總結使用的和的,能夠很好的支持這樣的有狀態服務部署到集群上。部署方式有待優化本次試驗中使用靜態方式部署集群,如果節點變遷時,需要執行等命令手動配置集群,嚴重限制了集群自動故障恢復擴容縮容的能力。
kubernetes通過statefulset為zookeeper、etcd等這類有狀態的應用程序提供完善支持,statefulset具備以下特性:
為pod提供穩定的唯一的網絡標識
穩定值持久化存儲:通過pv/pvc來實現
啟動和停止pod保證有序:優雅的部署和伸縮性
本文闡述了如何在k8s集群上部署zookeeper和etcd有狀態服務,并結合ceph實現數據持久化。
二. 總結使用k8s的statefulset、storageclass、pv、pvc和ceph的rbd,能夠很好的支持zookeeper、etcd這樣的有狀態服務部署到kubernetes集群上。
k8s不會主動刪除已經創建的pv、pvc對象,防止出現誤刪。
如果用戶確定刪除pv、pvc對象,同時還需要手動刪除ceph段的rbd鏡像。
遇到的坑
storageclass中引用的ceph客戶端用戶,必須要有mon rw,rbd rwx權限。如果沒有mon write權限,會導致釋放rbd鎖失敗,無法將rbd鏡像掛載到其他的k8s worker節點。
zookeeper使用探針檢查zookeeper節點的健康狀態,如果節點不健康,k8s將刪除pod,并自動重建該pod,達到自動重啟zookeeper節點的目的。
因zookeeper 3.4版本的集群配置,是通過靜態加載文件zoo.cfg來實現的,所以當zookeeper節點pod ip變動后,需要重啟zookeeper集群中的所有節點。
etcd部署方式有待優化
本次試驗中使用靜態方式部署etcd集群,如果etcd節點變遷時,需要執行etcdctl member remove/add等命令手動配置etcd集群,嚴重限制了etcd集群自動故障恢復、擴容縮容的能力。因此,需要考慮對部署方式優化,改為使用DNS或者etcd descovery的動態方式部署etcd,才能讓etcd更好的運行在k8s上。
三. zookeeper集群部署 1. 下載鏡像docker pull gcr.mirrors.ustc.edu.cn/google_containers/kubernetes-zookeeper:1.0-3.4.10 docker tag gcr.mirrors.ustc.edu.cn/google_containers/kubernetes-zookeeper:1.0-3.4.10 172.16.18.100:5000/gcr.io/google_containers/kubernetes-zookeeper:1.0-3.4.10 docker push 172.16.18.100:5000/gcr.io/google_containers/kubernetes-zookeeper:1.0-3.4.102. 定義ceph secret
cat << EOF | kubectl create -f - apiVersion: v1 data: key: QVFBYy9ndGFRUno4QlJBQXMxTjR3WnlqN29PK3VrMzI1a05aZ3c9PQo= kind: Secret metadata: creationTimestamp: 2017-11-20T10:29:05Z name: ceph-secret namespace: default resourceVersion: "2954730" selfLink: /api/v1/namespaces/default/secrets/ceph-secret uid: a288ff74-cffffd-11e7-81cc-000c29f99475 type: kubernetes.io/rbd EOF3. 定義storageclass rbd存儲
cat << EOF | kubectl create -f - apiVersion: storage.k8s.io/v1 kind: StorageClass metadata: name: ceph parameters: adminId: admin adminSecretName: ceph-secret adminSecretNamespace: default fsType: ext4 imageFormat: "2" imagefeatures: layering monitors: 172.16.13.223 pool: k8s userId: admin userSecretName: ceph-secret provisioner: kubernetes.io/rbd reclaimPolicy: Delete EOF4. 創建zookeeper集群
使用rbd存儲zookeeper節點數據
cat << EOF | kubectl create -f - --- apiVersion: v1 kind: Service metadata: name: zk-hs labels: app: zk spec: ports: - port: 2888 name: server - port: 3888 name: leader-election clusterIP: None selector: app: zk --- apiVersion: v1 kind: Service metadata: name: zk-cs labels: app: zk spec: ports: - port: 2181 name: client selector: app: zk --- apiVersion: policy/v1beta1 kind: PodDisruptionBudget metadata: name: zk-pdb spec: selector: matchLabels: app: zk maxUnavailable: 1 --- apiVersion: apps/v1beta2 # for versions before 1.8.0 use apps/v1beta1 kind: StatefulSet metadata: name: zk spec: selector: matchLabels: app: zk serviceName: zk-hs replicas: 3 updateStrategy: type: RollingUpdate podManagementPolicy: Parallel template: metadata: labels: app: zk spec: affinity: podAntiAffinity: requiredDuringSchedulingIgnoredDuringExecution: - labelSelector: matchExpressions: - key: "app" operator: In values: - zk topologyKey: "kubernetes.io/hostname" containers: - name: kubernetes-zookeeper imagePullPolicy: Always image: "172.16.18.100:5000/gcr.io/google_containers/kubernetes-zookeeper:1.0-3.4.10" ports: - containerPort: 2181 name: client - containerPort: 2888 name: server - containerPort: 3888 name: leader-election command: - sh - -c - "start-zookeeper --servers=3 --data_dir=/var/lib/zookeeper/data --data_log_dir=/var/lib/zookeeper/data/log --conf_dir=/opt/zookeeper/conf --client_port=2181 --election_port=3888 --server_port=2888 --tick_time=2000 --init_limit=10 --sync_limit=5 --heap=512M --max_client_cnxns=60 --snap_retain_count=3 --purge_interval=12 --max_session_timeout=40000 --min_session_timeout=4000 --log_level=INFO" readinessProbe: exec: command: - sh - -c - "zookeeper-ready 2181" initialDelaySeconds: 10 timeoutSeconds: 5 livenessProbe: exec: command: - sh - -c - "zookeeper-ready 2181" initialDelaySeconds: 10 timeoutSeconds: 5 volumeMounts: - name: datadir mountPath: /var/lib/zookeeper securityContext: runAsUser: 1000 fsGroup: 1000 volumeClaimTemplates: - metadata: name: datadir annotations: volume.beta.kubernetes.io/storage-class: ceph spec: accessModes: [ "ReadWriteOnce" ] resources: requests: storage: 1Gi EOF
查看創建結果
[root@172 zookeeper]# kubectl get no NAME STATUS ROLES AGE VERSION 172.16.20.10 Ready50m v1.8.2 172.16.20.11 Ready 2h v1.8.2 172.16.20.12 Ready 1h v1.8.2 [root@172 zookeeper]# kubectl get po -owide NAME READY STATUS RESTARTS AGE IP NODE zk-0 1/1 Running 0 8m 192.168.5.162 172.16.20.10 zk-1 1/1 Running 0 1h 192.168.2.146 172.16.20.11 [root@172 zookeeper]# kubectl get pv,pvc NAME CAPACITY ACCESS MODES RECLAIM POLICY STATUS CLAIM STORAGECLASS REASON AGE pv/pvc-226cb8f0-d322-11e7-9581-000c29f99475 1Gi RWO Delete Bound default/datadir-zk-0 ceph 1h pv/pvc-22703ece-d322-11e7-9581-000c29f99475 1Gi RWO Delete Bound default/datadir-zk-1 ceph 1h NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE pvc/datadir-zk-0 Bound pvc-226cb8f0-d322-11e7-9581-000c29f99475 1Gi RWO ceph 1h pvc/datadir-zk-1 Bound pvc-22703ece-d322-11e7-9581-000c29f99475 1Gi RWO ceph 1h
zk-0 pod的rbd的鎖信息為
[root@ceph1 ceph]# rbd lock list kubernetes-dynamic-pvc-227b45e5-d322-11e7-90ab-000c29f99475 -p k8s --user admin There is 1 exclusive lock on this image. Locker ID Address client.24146 kubelet_lock_magic_172.16.20.10 172.16.20.10:0/16061523505. 測試pod遷移
嘗試將172.16.20.10節點設置為污點,讓zk-0 pod自動遷移到172.16.20.12
kubectl cordon 172.16.20.10 [root@172 zookeeper]# kubectl get no NAME STATUS ROLES AGE VERSION 172.16.20.10 Ready,SchedulingDisabled58m v1.8.2 172.16.20.11 Ready 2h v1.8.2 172.16.20.12 Ready 1h v1.8.2 kubectl delete po zk-0
觀察zk-0的遷移過程
[root@172 zookeeper]# kubectl get po -owide -w NAME READY STATUS RESTARTS AGE IP NODE zk-0 1/1 Running 0 14m 192.168.5.162 172.16.20.10 zk-1 1/1 Running 0 1h 192.168.2.146 172.16.20.11 zk-0 1/1 Terminating 0 16m 192.168.5.162 172.16.20.10 zk-0 0/1 Terminating 0 16m172.16.20.10 zk-0 0/1 Terminating 0 16m 172.16.20.10 zk-0 0/1 Terminating 0 16m 172.16.20.10 zk-0 0/1 Terminating 0 16m 172.16.20.10 zk-0 0/1 Terminating 0 16m 172.16.20.10 zk-0 0/1 Pending 0 0s zk-0 0/1 Pending 0 0s 172.16.20.12 zk-0 0/1 ContainerCreating 0 0s 172.16.20.12 zk-0 0/1 Running 0 3s 192.168.3.4 172.16.20.12
此時zk-0正常遷移到172.16.20.12
再查看rbd的鎖定信息
[root@ceph1 ceph]# rbd lock list kubernetes-dynamic-pvc-227b45e5-d322-11e7-90ab-000c29f99475 -p k8s --user admin There is 1 exclusive lock on this image. Locker ID Address client.24146 kubelet_lock_magic_172.16.20.10 172.16.20.10:0/1606152350 [root@ceph1 ceph]# rbd lock list kubernetes-dynamic-pvc-227b45e5-d322-11e7-90ab-000c29f99475 -p k8s --user admin There is 1 exclusive lock on this image. Locker ID Address client.24154 kubelet_lock_magic_172.16.20.12 172.16.20.12:0/3715989358
之前在另外一個ceph集群測試這個zk pod遷移的時候,總是報錯無法釋放lock,經分析應該是使用的ceph賬號沒有相應的權限,所以導致釋放lock失敗。記錄的報錯信息如下:
Nov 27 10:45:55 172 kubelet: W1127 10:45:55.551768 11556 rbd_util.go:471] rbd: no watchers on kubernetes-dynamic-pvc-f35a411e-d317-11e7-90ab-000c29f99475 Nov 27 10:45:55 172 kubelet: I1127 10:45:55.694126 11556 rbd_util.go:181] remove orphaned locker kubelet_lock_magic_172.16.20.12 from client client.171490: err exit status 13, output: 2017-11-27 10:45:55.570483 7fbdbe922d40 -1 did not load config file, using default settings. Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.600816 7fbdbe922d40 -1 Errors while parsing config file! Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.600824 7fbdbe922d40 -1 parse_file: cannot open /etc/ceph/ceph.conf: (2) No such file or directory Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.600825 7fbdbe922d40 -1 parse_file: cannot open ~/.ceph/ceph.conf: (2) No such file or directory Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.600825 7fbdbe922d40 -1 parse_file: cannot open ceph.conf: (2) No such file or directory Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.602492 7fbdbe922d40 -1 Errors while parsing config file! Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.602494 7fbdbe922d40 -1 parse_file: cannot open /etc/ceph/ceph.conf: (2) No such file or directory Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.602495 7fbdbe922d40 -1 parse_file: cannot open ~/.ceph/ceph.conf: (2) No such file or directory Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.602496 7fbdbe922d40 -1 parse_file: cannot open ceph.conf: (2) No such file or directory Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.651594 7fbdbe922d40 -1 auth: unable to find a keyring on /etc/ceph/ceph.client.k8s.keyring,/etc/ceph/ceph.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin,: (2) No such file or directory Nov 27 10:45:55 172 kubelet: rbd: releasing lock failed: (13) Permission denied Nov 27 10:45:55 172 kubelet: 2017-11-27 10:45:55.682470 7fbdbe922d40 -1 librbd: unable to blacklist client: (13) Permission denied
k8s rbd volume的實現代碼:
if lock { // check if lock is already held for this host by matching lock_id and rbd lock id if strings.Contains(output, lock_id) { // this host already holds the lock, exit glog.V(1).Infof("rbd: lock already held for %s", lock_id) return nil } // clean up orphaned lock if no watcher on the image used, statusErr := util.rbdStatus(&b) if statusErr == nil && !used { re := regexp.MustCompile("client.* " + kubeLockMagic + ".*") locks := re.FindAllStringSubmatch(output, -1) for _, v := range locks { if len(v) > 0 { lockInfo := strings.Split(v[0], " ") if len(lockInfo) > 2 { args := []string{"lock", "remove", b.Image, lockInfo[1], lockInfo[0], "--pool", b.Pool, "--id", b.Id, "-m", mon} args = append(args, secret_opt...) cmd, err = b.exec.Run("rbd", args...) # 執行rbd lock remove命令時返回了錯誤信息 glog.Infof("remove orphaned locker %s from client %s: err %v, output: %s", lockInfo[1], lockInfo[0], err, string(cmd)) } } } } // hold a lock: rbd lock add args := []string{"lock", "add", b.Image, lock_id, "--pool", b.Pool, "--id", b.Id, "-m", mon} args = append(args, secret_opt...) cmd, err = b.exec.Run("rbd", args...) }
可以看到,rbd lock remove操作被拒絕了,原因是沒有權限rbd: releasing lock failed: (13) Permission denied。
6. 測試擴容zookeeper集群節點數從2個擴為3個。
集群節點數為2時,zoo.cfg的配置中定義了兩個實例
zookeeper@zk-0:/opt/zookeeper/conf$ cat zoo.cfg #This file was autogenerated DO NOT EDIT clientPort=2181 dataDir=/var/lib/zookeeper/data dataLogDir=/var/lib/zookeeper/data/log tickTime=2000 initLimit=10 syncLimit=5 maxClientCnxns=60 minSessionTimeout=4000 maxSessionTimeout=40000 autopurge.snapRetainCount=3 autopurge.purgeInteval=12 server.1=zk-0.zk-hs.default.svc.cluster.local:2888:3888 server.2=zk-1.zk-hs.default.svc.cluster.local:2888:3888
使用kubectl edit statefulset zk命令修改replicas=3,start-zookeeper --servers=3,
此時觀察pod的變化
[root@172 zookeeper]# kubectl get po -owide -w NAME READY STATUS RESTARTS AGE IP NODE zk-0 1/1 Running 0 1h 192.168.5.170 172.16.20.10 zk-1 1/1 Running 0 1h 192.168.3.12 172.16.20.12 zk-2 0/1 Pending 0 0szk-2 0/1 Pending 0 0s 172.16.20.11 zk-2 0/1 ContainerCreating 0 0s 172.16.20.11 zk-2 0/1 Running 0 1s 192.168.2.154 172.16.20.11 zk-2 1/1 Running 0 11s 192.168.2.154 172.16.20.11 zk-1 1/1 Terminating 0 1h 192.168.3.12 172.16.20.12 zk-1 0/1 Terminating 0 1h 172.16.20.12 zk-1 0/1 Terminating 0 1h 172.16.20.12 zk-1 0/1 Terminating 0 1h 172.16.20.12 zk-1 0/1 Terminating 0 1h 172.16.20.12 zk-1 0/1 Pending 0 0s zk-1 0/1 Pending 0 0s 172.16.20.12 zk-1 0/1 ContainerCreating 0 0s 172.16.20.12 zk-1 0/1 Running 0 2s 192.168.3.13 172.16.20.12 zk-1 1/1 Running 0 20s 192.168.3.13 172.16.20.12 zk-0 1/1 Terminating 0 1h 192.168.5.170 172.16.20.10 zk-0 0/1 Terminating 0 1h 172.16.20.10 zk-0 0/1 Terminating 0 1h 172.16.20.10 zk-0 0/1 Terminating 0 1h 172.16.20.10 zk-0 0/1 Terminating 0 1h 172.16.20.10 zk-0 0/1 Pending 0 0s zk-0 0/1 Pending 0 0s 172.16.20.10 zk-0 0/1 ContainerCreating 0 0s 172.16.20.10 zk-0 0/1 Running 0 2s 192.168.5.171 172.16.20.10 zk-0 1/1 Running 0 12s 192.168.5.171 172.16.20.10
可以看到zk-0/zk-1都重啟了,這樣可以加載新的zoo.cfg配置文件,保證集群正確配置。
新的zoo.cfg配置文件記錄了3個實例:
[root@172 ~]# kubectl exec zk-0 -- cat /opt/zookeeper/conf/zoo.cfg #This file was autogenerated DO NOT EDIT clientPort=2181 dataDir=/var/lib/zookeeper/data dataLogDir=/var/lib/zookeeper/data/log tickTime=2000 initLimit=10 syncLimit=5 maxClientCnxns=60 minSessionTimeout=4000 maxSessionTimeout=40000 autopurge.snapRetainCount=3 autopurge.purgeInteval=12 server.1=zk-0.zk-hs.default.svc.cluster.local:2888:3888 server.2=zk-1.zk-hs.default.svc.cluster.local:2888:3888 server.3=zk-2.zk-hs.default.svc.cluster.local:2888:38887. 測試縮容
縮容的時候,zk集群也自動重啟了所有的zk節點,縮容過程如下:
[root@172 ~]# kubectl get po -owide -w NAME READY STATUS RESTARTS AGE IP NODE zk-0 1/1 Running 0 5m 192.168.5.171 172.16.20.10 zk-1 1/1 Running 0 6m 192.168.3.13 172.16.20.12 zk-2 1/1 Running 0 7m 192.168.2.154 172.16.20.11 zk-2 1/1 Terminating 0 7m 192.168.2.154 172.16.20.11 zk-1 1/1 Terminating 0 7m 192.168.3.13 172.16.20.12 zk-2 0/1 Terminating 0 8m四. etcd集群部署 1. 創建etcd集群172.16.20.11 zk-1 0/1 Terminating 0 7m 172.16.20.12 zk-2 0/1 Terminating 0 8m 172.16.20.11 zk-1 0/1 Terminating 0 7m 172.16.20.12 zk-1 0/1 Terminating 0 7m 172.16.20.12 zk-1 0/1 Terminating 0 7m 172.16.20.12 zk-1 0/1 Pending 0 0s zk-1 0/1 Pending 0 0s 172.16.20.12 zk-1 0/1 ContainerCreating 0 0s 172.16.20.12 zk-1 0/1 Running 0 2s 192.168.3.14 172.16.20.12 zk-2 0/1 Terminating 0 8m 172.16.20.11 zk-2 0/1 Terminating 0 8m 172.16.20.11 zk-1 1/1 Running 0 19s 192.168.3.14 172.16.20.12 zk-0 1/1 Terminating 0 7m 192.168.5.171 172.16.20.10 zk-0 0/1 Terminating 0 7m 172.16.20.10 zk-0 0/1 Terminating 0 7m 172.16.20.10 zk-0 0/1 Terminating 0 7m 172.16.20.10 zk-0 0/1 Pending 0 0s zk-0 0/1 Pending 0 0s 172.16.20.10 zk-0 0/1 ContainerCreating 0 0s 172.16.20.10 zk-0 0/1 Running 0 3s 192.168.5.172 172.16.20.10 zk-0 1/1 Running 0 13s 192.168.5.172 172.16.20.10
cat << EOF | kubectl create -f - apiVersion: v1 kind: Service metadata: name: "etcd" annotations: # Create endpoints also if the related pod isn"t ready service.alpha.kubernetes.io/tolerate-unready-endpoints: "true" spec: ports: - port: 2379 name: client - port: 2380 name: peer clusterIP: None selector: component: "etcd" --- apiVersion: apps/v1beta1 kind: StatefulSet metadata: name: "etcd" labels: component: "etcd" spec: serviceName: "etcd" # changing replicas value will require a manual etcdctl member remove/add # command (remove before decreasing and add after increasing) replicas: 3 template: metadata: name: "etcd" labels: component: "etcd" spec: containers: - name: "etcd" image: "172.16.18.100:5000/quay.io/coreos/etcd:v3.2.3" ports: - containerPort: 2379 name: client - containerPort: 2380 name: peer env: - name: CLUSTER_SIZE value: "3" - name: SET_NAME value: "etcd" volumeMounts: - name: data mountPath: /var/run/etcd command: - "/bin/sh" - "-ecx" - | IP=$(hostname -i) for i in $(seq 0 $((${CLUSTER_SIZE} - 1))); do while true; do echo "Waiting for ${SET_NAME}-${i}.${SET_NAME} to come up" ping -W 1 -c 1 ${SET_NAME}-${i}.${SET_NAME}.default.svc.cluster.local > /dev/null && break sleep 1s done done PEERS="" for i in $(seq 0 $((${CLUSTER_SIZE} - 1))); do PEERS="${PEERS}${PEERS:+,}${SET_NAME}-${i}=http://${SET_NAME}-${i}.${SET_NAME}.default.svc.cluster.local:2380" done # start etcd. If cluster is already initialized the `--initial-*` options will be ignored. exec etcd --name ${HOSTNAME} --listen-peer-urls http://${IP}:2380 --listen-client-urls http://${IP}:2379,http://127.0.0.1:2379 --advertise-client-urls http://${HOSTNAME}.${SET_NAME}:2379 --initial-advertise-peer-urls http://${HOSTNAME}.${SET_NAME}:2380 --initial-cluster-token etcd-cluster-1 --initial-cluster ${PEERS} --initial-cluster-state new --data-dir /var/run/etcd/default.etcd ## We are using dynamic pv provisioning using the "standard" storage class so ## this resource can be directly deployed without changes to minikube (since ## minikube defines this class for its minikube hostpath provisioner). In ## production define your own way to use pv claims. volumeClaimTemplates: - metadata: name: data annotations: volume.beta.kubernetes.io/storage-class: ceph spec: accessModes: - "ReadWriteOnce" resources: requests: storage: 1Gi EOF
創建完成之后的po,pv,pvc清單如下:
[root@172 etcd]# kubectl get po -owide NAME READY STATUS RESTARTS AGE IP NODE etcd-0 1/1 Running 0 15m 192.168.5.174 172.16.20.10 etcd-1 1/1 Running 0 15m 192.168.3.16 172.16.20.12 etcd-2 1/1 Running 0 5s 192.168.5.176 172.16.20.102. 測試縮容
kubectl scale statefulset etcd --replicas=2 [root@172 ~]# kubectl get po -owide -w NAME READY STATUS RESTARTS AGE IP NODE etcd-0 1/1 Running 0 17m 192.168.5.174 172.16.20.10 etcd-1 1/1 Running 0 17m 192.168.3.16 172.16.20.12 etcd-2 1/1 Running 0 1m 192.168.5.176 172.16.20.10 etcd-2 1/1 Terminating 0 1m 192.168.5.176 172.16.20.10 etcd-2 0/1 Terminating 0 1m172.16.20.10
檢查集群健康
kubectl exec etcd-0 -- etcdctl cluster-health failed to check the health of member 42c8b94265b9b79a on http://etcd-2.etcd:2379: Get http://etcd-2.etcd:2379/health: dial tcp: lookup etcd-2.etcd on 10.96.0.10:53: no such host member 42c8b94265b9b79a is unreachable: [http://etcd-2.etcd:2379] are all unreachable member 9869f0647883a00d is healthy: got healthy result from http://etcd-1.etcd:2379 member c799a6ef06bc8c14 is healthy: got healthy result from http://etcd-0.etcd:2379 cluster is healthy
發現縮容后,etcd-2并沒有從etcd集群中自動刪除,可見這個etcd鏡像對自動擴容縮容的支持并不夠好。
我們手工刪除掉etcd-2
[root@172 etcd]# kubectl exec etcd-0 -- etcdctl member remove 42c8b94265b9b79a Removed member 42c8b94265b9b79a from cluster [root@172 etcd]# kubectl exec etcd-0 -- etcdctl cluster-health member 9869f0647883a00d is healthy: got healthy result from http://etcd-1.etcd:2379 member c799a6ef06bc8c14 is healthy: got healthy result from http://etcd-0.etcd:2379 cluster is healthy3. 測試擴容
從etcd.yaml的啟動腳本中可以看出,擴容時新啟動一個etcd pod時參數--initial-cluster-state new,該etcd鏡像并不支持動態擴容,可以考慮使用基于dns動態部署etcd集群的方式來修改啟動腳本,這樣才能支持etcd cluster動態擴容。
文章版權歸作者所有,未經允許請勿轉載,若此文章存在違規行為,您可以聯系管理員刪除。
轉載請注明本文地址:http://specialneedsforspecialkids.com/yun/32607.html
摘要:二總結使用的和的,能夠很好的支持這樣的有狀態服務部署到集群上。部署方式有待優化本次試驗中使用靜態方式部署集群,如果節點變遷時,需要執行等命令手動配置集群,嚴重限制了集群自動故障恢復擴容縮容的能力。 一. 概述 kubernetes通過statefulset為zookeeper、etcd等這類有狀態的應用程序提供完善支持,statefulset具備以下特性: 為pod提供穩定的唯一的...
摘要:是一個相對比較新的微服務框架,年才推出的版本雖然時間最短但是相比等框架提供的全套的分布式系統解決方案。提供線程池不同的服務走不同的線程池,實現了不同服務調用的隔離,避免了服務器雪崩的問題。通過互相注冊的方式來進行消息同步和保證高可用。 Spring Cloud 是一個相對比較新的微服務框架,...
摘要:的服務治理平臺發源于早期的個人項目。客戶端發現模式要求客戶端負責查詢注冊中心,獲取服務提供者的列表信息,使用負載均衡算法選擇一個合適的服務提供者,發起接口調用請求。系統和系統之間,少不了數據的互聯互通。隨著微服務的流行,一個系統內的不同應用進行互聯互通也是常態。 PowerDotNet的服務治理平臺發源于早期的個人項目Power.Apix。這個項目借鑒了工作過的公司的服務治理方案,站在...
摘要:谷歌思科華為等等均是的貢獻成員。其中谷歌云平臺和等大型云提供商成功在生產環境中使用了。它為良好穩定的生產部署提供了一個良好的起點。預先準備在繼續之前,我們需要準備一個谷歌云平臺的賬號免費的應該足夠了。我們將為部署配置。 本文將帶你充分了解Etcd的工作原理,演示如何用Kubernetes建立并運行etcd集群,如何與Etcd交互,如何在Etcd中設置和檢索值,如何配置高可用等等。 sh...
閱讀 1792·2021-09-03 10:50
閱讀 1327·2019-08-30 15:55
閱讀 3369·2019-08-30 15:52
閱讀 1231·2019-08-30 15:44
閱讀 935·2019-08-30 15:44
閱讀 3319·2019-08-30 14:23
閱讀 3551·2019-08-28 17:51
閱讀 2291·2019-08-26 13:52